Metal Roof E-Curb Penetration Seal System

Product Documents

Need More Information?

Contact Us
Metal Roof E-Curb penetration seals replace old-style rubber boots with versatile, precast components and non-sag 1-Part polyether sealants for installations on a sloped substrate. Chem Link’s Metal Roof E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. E-Curbs are designed for use on metal roofing systems that require adhesion to Kynar 500® PVDF coated metals. E-Curbs are highly versatile for sealing penetrations around HVAC, mechanical, solar panel mounts, electrical, and any type of structural supports. TPO Primer is required for use with TPO single-ply roofing membrane.

Installation

Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Remove all previously applied caulk, mastic, cement, asphalt, and other contaminants from penetrations with a wire brush.  Isopropyl alcohol is an effective cleaner for surface preparation.  Please contact customer service for application guidelines with temperatures below 32°F (0°C).  This product sets rapidly upon exposure to moisture. Please refer to data sheet for step-by-step installation guidelines.

Only available through Chem Link distributors.

This Is A Special Order Item

Find a Rep

Product Features

    • rapid install 'slip -fit' light weight curb design
    • service temps wide range -40F to 200F
    • 1 part feature accommodates movement
    • labor savings no flashing required