Hot Pipe E-Curb™ Penetration Seal SystemSKU: F1358

PRODUCT DOCUMENTS

Need More Information?

Contact Us
Hot Pipe E-Curb penetration seals replace old-style metal pitch pan roof installations with versatile, precast components and RTV silicone pourable sealants for installations requiring a service temperature between -80°F to 400°F (-62°C to 204°C). CHEM LINK’s Hot Pipe E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing). E-Curbs are specified for PVC, EPDM, PIB, and TPO single-ply roofing membranes. E-Curbs are highly versatile for sealing penetrations around HVAC, mechanical, solar panel mounts, electrical, and any type of structural supports and last longer than pitch pans with greater efficiency as well. TPO Primer is required for use with TPO single-ply roofing membrane.

Installation

Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Remove all previously applied caulk, mastic, cement, asphalt, and other contaminants from penetrations with a wire brush. Brush away all gravel or loose granules. Isopropyl alcohol is an effective cleaner for surface preparation. Please contact customer service for application guidelines with temperatures below 32°F (0°C). Do not use on TPO without the use of TPO primer. Do not use on Hypalon. Smooth APP membranes require a granulated target. This product sets rapidly upon exposure to moisture. Please refer to data sheet for step-by-step installation guidelines. Only available through Chem Link distributors.

Hot Pipe E-Curb™ Penetration Seal System

SKU: field_5d49ae242fcfa Category:

Additional information

Weight 10 lbs
Color of Sealant (Color)

Gray

Size of Sealant (Size)

4" Diameter E-Curb Kit (4) complete curbs per carton, 6" Diameter E-Curb Kit (3) complete curbs per carton

Product Features

Rapid Installation

'slip-fit' light weight curb design

1-Part Feature

accommodates movement

Labor Savings

no flashing required

Share this page